Horizontal Bright Annealing Line for Stainless Steel Strip

Welcome to visit jtfurnace dot com. Horizontal Bright Annealing Line for Stainless Steel Strip is for continuous bright annealing of the stainless steel strip etc. The heating way may be by electricity, gas, fuel oil. Advantages: 1 Intelligent heating power stepless adjustment, annealing temperature uniformity 2 Strip steel speed tension control drive, high straightness 3 Uniform hardness, bright color, good surface quality 4 Stable organization and performance 5 Short Annealing period, high productivity Detailed product specifications, please visit our website jtfurnace com. And email to us jtfurnace at hotmail dot com.

Annealing Furnace

single row angular contact ball bearing

Four-point contact ball bearings are radial single row Angular Contact Ball Bearings with raceways that are designed to support axial loads acting in both directions. Radial loads can be supported up to a certain fraction of the axial load. These bearings take up considerably less axial space than double row bearings.

bearing

polishing material for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

boiler steel pipe in china

Grade:10/20 Specification(mm):21.3-16*3-16 Standard:GB3087 Application: for low and medium pressure boiler, superheated vapor pipe, water boiler, and heating surface of water-tube boiler

steel pipe

nylon abrasive polishing wheel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

Taper Fitting Tooth

Alloy steel Body, made by material ASTM4142 or 42CrMo, heat treatment with 48-52HRC hardness, has high toughness and wearable character. Tip is made from Low press Sintered, and Suitable Grade Selected according to the Target Projects, Which are to make sure the good performance during working.

auger tooth

copper grinding wheel

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

Four column hydraulic press

This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and This hydraulic press series is suitable for compression process of materials, for example, punching, bending, side-turning and thin-sheet stretching. Besides, it can be also used for calibration and compression packing and molding of powder materials and compression molding of non-metal materials. This press series applies tow electrical control systems, that is, relay control and PLC control and three operation modes, that is, adjustment, manual and semi-automatic operation. It can realize two process modes of preset compression and preset stroke. When preset compression molding is applied, a delay and automatic back-stroking action is maintained after compression. Product characteristics: 1. It applies liquid-filling quick-action technology that doubles operation efficiency. 2. Three big beams apply integrated structure that guarantee the equipment quality and operation lifetime. 3. Two electrical control systems, that is, relay or PLC, can be selected for convenient operation of customers.

scrap baler

automatic metal ceiling panel production line clip-in

Fully automatic metal ceiling panel production line ceiling panel production line Http://www.pujinwj.com Nomi capacity: 600 KN Nominal capacity of main cylinder: 400 KN Nominal capacity of lower cylinder: 200 KN Stroke of main cylinder: 400mm Stroke of lower cylinder: 190mm Fast down speed of main cylinder: 200mm/s Feeding speed of main cylinder:23mm/s Return speed of main sylinder: 220 mm/s Ejection speed of lower cylinder: 110mm/s Stroke of rnockout: 130mm/s Ejection force of stripping cylinder: 10KN Bolster area (L.R X F.B) : 900mm X 800mm Open height(L.S X L.B): 270mm X670mm Main cylinder oil pressure: 21 Mpa Lower cylinder oil: 21 Mpa Motor power: 7.5 KW Please feel free to contact us for further specifications!

Hardware & Machinery Mould

Automatic metal ceiling tile production line 600x600mm

Automatic metal ceiling tile production line Ceiling production line ceiling tile machine Http://www.pujinwj.com E-mail:pujinhardware@hotmail.com Nomi capacity: 600 KN Nominal capacity of main cylinder: 400 KN Nominal capacity of lower cylinder: 200 KN Stroke of main cylinder: 400mm Stroke of lower cylinder: 190mm Fast down speed of main cylinder: 200mm/s Feeding speed of main cylinder:23mm/s Return speed of main sylinder: 220 mm/s Ejection speed of lower cylinder: 110mm/s Stroke of rnockout: 130mm/s Ejection force of stripping cylinder: 10KN Bolster area (L.R X F.B) : 900mm X 800mm Open height(L.S X L.B): 270mm X670mm Main cylinder oil pressure: 21 Mpa Lower cylinder oil: 21 Mpa Motor power: 7.5 KW Please feel free to contact us for further specifications!

Hardware & Machinery Mould

Aluminum foil container making machine (pneumatic 63ton)

Aluminum foil container production line Http://www.pujinwj.com Max. material roll diameter: 700mm Max. material roll width: 50-600mm Feeding speed: 200m/min Feeding length: 30-2000mm Feeding tolerance: +/-0.1mm Please feel free to contact us for further discussion!

Hardware & Machinery Mould

hydraulic paper baler

This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal sta Detailed Product Description This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal state. The material volumes are reduced dramatically and more materials can be stuffed into the same space, so as to achieve smaller transportation volume, save transportation cost and increase profit for the enterprises. Product Characteristics: 1. This machine applies hydraulic drive. It is convenient in installation, simple in operation and reliable in use. 2. The door is opened hydraulically to remove the package elasticity and discharge the package smoothly, which is safe and reliable. 3. This machine is equipped with a quick-action device. Its packing speed is one time higher than that of other equipment of the same type made by other manufacturers. The product is characterized by high working efficiency and low energy consumption and is suitable for repeated material charging and packing for light foam materials.

scrap baler

China Aluminum Aging Oven

Welcome to visit jtfurnace dot com. Aluminum Profile Aging Oven The aluminum production and processing into the aging treatment carried out to improve the mechanical characteristics of aluminum and the promotion of strength. The heating way may elect to use oil, gas, electricity. Advantages: 1. Optimizing the structure design. Available in single door or double door, do towline type or roller type. 2. The circulating fan uses squirrel-cage type double-suction high-volume blower. low noise, high efficiency, to achieve temperature uniformity of +-5. 3. When dealing with long profiles in the circulation air duct, set the time and temperature of the reversing mechanism, two-way thermal cycling. and promote the furnace temperature uniformity. Detailed product specifications, please visit our website jtfurnace com. And email to us jtfurnace at hotmail dot com

Annealing Furnace

pipe extrusion line......

pipe extrusion line,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

Concrete cutter

EY20 Concrete cutter 1. Concrete cutter is ergonomicly designed structure to ensure comfortable operation 2. Super-rigid box frame ensures straight cuts 3. With comfortable and firm handle grip 4. Easy crank for raising/lowering cutting blade 5. With easy-remove, rustless ploy water tank, this provide an optimum flow and volume of water to the blade 6. It is widely applied to highway construction, municipal engineering, construction, stone factories, mines and so on and used to cut concrete pavement, concrete slabs, marble and granite pavement, slate, terrazzo and other brittle hard materials Model HCC-16-GX160 HCC-16-EY20 Engine type Air-cooled, single cylinder,4-stroke Engine Honda GX160 Robin EY20 Power( Hp ) 5.5 5 Blade diameter ( mm ) 300 Max, cutting depth ( mm ) 90 Driving Manual push Blade speed ( rpm ) Up to 3600 Water tank capacity ( L ) 12 Power train From engine via belt to cutting shaft Starter Recoil starter Operating weight ( kg ) 78 Shipping weight ( kg ) 83 Operating dimension ( L*W*H )(cm) 115 * 47 * 93 Shipping size ( L*W*H )(cm) 92 * 52 * 84

generator

PPR pipe extrusion line......

PPR pipe extrusion line,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

cylindrical gear reducer

Detailed Product Description:Reducer; Gear reducer; ZLY series Characteristic: 1.Smooth in running and small in volume 2.Compact structure and low weight 3.High transmission efficiency 4.Work long time in dreadful condition 5.Long service life Technical data: Input speed:750r/min,1000r/min,1500r/min Output speed:38-240r/min Ratio:6.3-20 Power:6.8KW-6229KW

reducer

copper pollishing wheel

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

Round shank tooth

The products adapt to the machine with all the performance features such as a high feed rate, a long service life and short tool changing times. Together with the parts supply assurance, a high daily production volume, and above-average economy is guaranteed.

auger tooth

bearing housing

The insert bearings are the Deep groove ball bearings with wide inner rings, it insert in housing work as an unit bearings. The housing are mainly casting or pressed steel. The bearing unit are compact in design with perfect sealing devices . they can align with easy during operation and can be conveniently mounted or dismounted.

bearing

Seamless Steel tube in china

Changzhou yuanyang steel tube Co.,Ltd is a professional corporation for structural seamless steel pipe, which is located in eastern of Changzhou Jiangsu Province.We are steel pipe cleaning truck manufacturer from China,please view them and select the most helpful info for you. Besides, we also provide you with wall mount related products such as seamless steel tube,oil pipe,line pipe,casing pipe coupling material,oil casing.

steel pipe

China Aluminum Quenching Furnace

Welcome to visit jtfurnace dot com. Vertical Aluminum Quenching Furnace Advantages: 1.Temperature Uniformity To achieve +-5 of temperature uniformity is based on circulation fan, air guide plate, furnace structure, electric power distribution and arrangement of electric heating elements, control and process associated door structure designed to ensure 2.Advanced mechanical systems System advanced by the design, component selection and quality, manufacturing quality to be guaranteed. Mechanical systems running reliably. 3.Consummation control system Control system is reliable, easy to operate, to avoid human errors, complete functions 4.Quenching transfer time is rapid and adjustable The Activity door, Double-speed elevating mechanism, advanced mechanical system, making the transfer quenching rapid, reliable, and the time according to the user process requirements adjusted within 5-10S. Detailed product specifications, please visit our website jtfurnace com. And email to jtfurnace at hotmail dot com.

Annealing Furnace

grinding wheel for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

China Continuous Carburization Furnace

Welcome to visit jtfurnace dot com. Continuous Carburization Furnace is for continuous carburizing quenching and tempering. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. large capacity, easy maintenance. 2.Equipped with mixing fans. In the furnace the temperature atmosphere is even. 3.The atmosphere controls stably, the processing product organization is stable 4.Underneath the furnace side is equipped with the clear slag notch. 5.With emission and waste heat recovery agencies before the furnace. 6.Oil tank with the cold heat exchanger and filter, can control the oil temperature and ensure clean. 7.Washing machine is equipped with the oil-water separator and the strong dry winds system. 8.Tempering furnace heating elements have upper and lower sub-row design layout, with the mixing fans. 9.Products with low residual austenite, hardness uniform, bright and clean surface. Product specifications, please email to jtfurnace at hotmail dot com.

Annealing Furnace

pipe production line.......

pipe production line,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

PP PIPE PRODUCTION LINE......

PP PIPE PRODUCTION LINE,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

pipe extruder......

pipe extruder,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

Plastic pipe extrusion line.....,.

Plastic pipe extrusion line,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

Plastic pipe production line......

Plastic pipe production line,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

metal ceiling tile production line 300X300 mm

Automatic metal ceiling tile production line 300X300mm our company main products:auto metal ceiling tile production line,aluminum foil container production line and metal mould Http://www.pujinwj.com Nomi capacity: 400 KN Nominal capacity of main cylinder: 250 KN Nominal capacity of lower cylinder: 150 KN Stroke of main cylinder: 380mm Stroke of lower cylinder: 180mm Fast down speed of main cylinder: 200mm/s Feeding speed of main cylinder:23mm/s Return speed of main sylinder: 220 mm/s Ejection speed of lower cylinder: 110mm/s Stroke of rnockout: 110mm/s Ejection force of stripping cylinder: 10KN Bolster area (L.R X F.B) : 600mm X 600mm Open height(L.S X L.B): 250mm X630mm Main cylinder oil pressure: 21 Mpa Lower cylinder oil: 21 Mpa Motor power: 5.5 KW Please feel free to contact us for further specifications!

Hardware & Machinery Mould

nylon abrasive wheel for polishing

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

stainless steel pollishing wheel

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

grinding disc for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

China Quenched Tempered Line

Welcome to visit jtfurnace dot com. Quenched Tempered Heat Treatment Line is for continuous carburizing quenching and tempering. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. large capacity, easy maintenance. 2.Equipped with mixing fans. In the furnace the temperature atmosphere is even. 3.The atmosphere controls stably, the processing product organization is stable 4.Underneath the furnace side is equipped with the clear slag notch. 5.With emission and waste heat recovery agencies before the furnace. 6.Oil tank with the cold heat exchanger and filter, can control the oil temperature and ensure clean. 7.Washing machine is equipped with the oil-water separator and the strong dry winds system. 8.Tempering furnace heating elements have upper and lower sub-row design layout, with the mixing fans. 9.Products with low residual austenite, hardness uniform, bright and clean surface. Product specifications, please email to jtfurnace at hotmail dot com.

Annealing Furnace

extrusion equipment......

extrusion equipment,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

China Pit Nitriding Oven

Welcome to visit jtfurnace dot com. Pit Nitriding Oven Advantages: 1.Electric furnace with hot air circulation system that allows the muffle atmosphere and temperature uniformity. 2.With atmosphere protection, no distortion, no oxidation, saving raw materials. 3.Furnace cover lift uses electric hydraulic device, furnace cover is with smooth up and down, jitter-free. 4.Furnace muffle, loading baskets, fans, etc. with heat-resistant alloy steel, long life. 5.Furnace is equipped with the rapid cooling installment, may cool rapidly according to the need. 6.Furnace is equipped with the chain-like protective device, may prevent the breakdown and accident which occurs due to the misoperation. 7.Exhaust gas discharged through the combustion, no pollution, environmental protection, good benefits 8.Decomposition rate was controllable, mature technology, stable application. 9.The processing product cost is low, for example, aluminum material mold average cost 0.45Yuan/kg. Detailed product specifications, please email to jtfurnace at hotmail dot com.

Annealing Furnace

Drive Lug in china

Place of origin Changzhou,China Application Drilling, Trenching, Mining and Tunnelling, Recycling Certification ISO9001:2008 Material 8630 Port of loading Shanghai Packing Wooden case, Iron case or Plastice box Minimum order 500 PCS Payment terms TT or L/C Supply ability 50,000 PCS/Month Delivery time 4~8 weeks

auger tooth

plastic extrusion machineries......

plastic extrusion machineries,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

single row angular contact ball bearings

Single row Angular Contact Ball Bearings can accommodate axial loads acting in one direction only. Under radial loads a force acting in the axial direction is produced in the bearing, and this force must be counteracted. Consequently the bearing is normally adjusted against a second bearing. single row Angular Contact Ball Bearings are produced in two versions - basic design bearings (not universally matchable)-can only be used for arrangements with single bearings bearings for universal matching. The larger sizes are produced exclusively as universally matchable bearings.

bearing

extrusion machines......

extrusion machines,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

China Aluminum Annealing Furnace

Welcome to visit jtfurnace dot com. Aluminum Annealing Furnace (for Coil,Sheet,Foil,wire,log,billet,slab) Advantages: 1.Temperature Uniformity To achieve +-5 of temperature uniformity is based on low pressure large flow axialflow reversible horizontal type circulation fan, air guide plate, furnace structure, electric power distribution and arrangement of electric heating elements, control and process associated door structure designed to ensure 2.Advanced mechanical systems System advanced by the design, component selection and quality, manufacturing quality to be guaranteed. Mechanical systems running smoothly and reliably, the device is a low noise, low-vibration working conditions 3.Consummation control system Precise temperature control can be reflected in the system is reliable, easy to operate, to avoid human errors, complete functions, etc. Detailed product specifications, please visit our website jtfurnace com. And email to jtfurnace at hotmail dot com.

Annealing Furnace

steel boiler tube in china

We are seamless carbon steel manufacturer from China,please view them and select the most helpful info for you. Besides, we also provide you with wall mount related products such as seamless steel pipe,steel pipe,oil pipe,casing pipe coupling material,oil casing. The seamless carbon boiler pipe we manufacture are widely applied in many industries such as chemical, boiler, geologic, construction, auto, engine, oil etc.The products have good precision sizes; uniform thickness; glabrous surface and good linearity.

steel pipe

nylon abrasive for polishing

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

plastic extrusion machine......

plastic extrusion machine,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

conical twin-screw extruder......

conical twin-screw extruder,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

plastic extrusion machines......

plastic extrusion machines,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

plastic extrusion machines.......

plastic extrusion machines,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

small baler

1. FULL AUTOMATIC, 2. WITH FAST DEVICE, 3. FOR PRESSING VARIOUS METAL SCRAP LIKE AUTOMIBLE SHELL, OIL DRUM, STEEL SCRAPS ETC. This machine cold compresses the light thin materials of dismounted automobile shells, waste bucket, waste copper and aluminum into rectangle lumps. The package is discharged from the front and secondary compression is applied. The operation efficiency is high and lump lengths are identical and uniform. The hydraulic system applies an integrated valve block and the product is stable and reliable in technical performance. Product characteristics: 1. The longest main cylinder applies quick-action technology and its operation efficiency is one time higher than that of the machines of the same type in China. 2. The machine for export is designed with integration of main machine and ydraulic system. It covers small area and does not need any installation. 3. The package is discharged from the front the package lengths are identical and uniform. The package is compact and nice.

scrap baler

disc for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

Crumb cake hydraulic press (SBJ2500)

We have patent right of this briquetting press ,patent no :ZL200320325.0,the patent is for fast running, our machine is running faster than other factories in China. 1.Brief introduction: This machine can coldly compress powder and grain shaped cast steel chips, steel chips, sponge iron, copper chips and aluminum chips into column-shaped lump with a density of >5T/M3,PLC control with automatic material feeding, lump discharging and high efficiency. (containing no bonding reagents). The compressed lumps can substitute raw materials and be used directly. This type of machine is suitable for customers that handle moderate iron chip amount The output of each shift is 16 to 20ton. The model is fit for big amount ferrous chip. It gains three patents in the country and our main customers are in Asia area. This kind of machine is produced in China professionally Characteristics: 1. This machine applies a hydraulic drive with low noise. It is safe and reliable. 2. This machine applies a vertical framework structure, occupies small area and is safe and reliable. 3. PLC control with automatic material feeding, lump discharging and high efficiency. Model Cyl. Force(KN) Briquet Size (Dia*H) (mm) Briquet Density (T/m3) Blocks (qty/min) Briquet Weight (kgS) Production Rate(T/SHIFT) Motor(KW) SBJ-1500A 150 80*(60-80) > 5 3 2-2.5 3-4 15 SBJ-2000 200 80*(60-80) > 5 3 2.5-3 4-5 18.5 SBJ-2000A 200 80*(60-80) > 5 4 2.5-3 4-5 15 SBJ-2000B 200 80*(60-80) > 5 5 2.5-3 4-6 15 SBJ-2500 250 (80-90)*(60-80) > 5.2 4 2.5-3 4-6 18.5 SBJ-2500B 250 (80-90)*(60-80) > 5.2 5 2.5-3 5-6 18.5 SBJ-2500C 250 (90-110)*(70-100) > 5.2 5 3-4 6-7 18.5 SBJ-3150B 315 (90-110)*(70-100) > 5.5 6 3-4 8-12 30 SBJ-3600 360 (100-140)*(70-100) > 5.5-6 5 3.5-5 10-12 30 SBJ-5000 500 (120-150)*(70-100) > 5.5-6 5 5-6 16-20 37 SBJ-6300 630 (130-160)*(100-120) > 5.5-6 4 6-10 20-30 37

scrap baler