pollishing grinding wheel

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

nylon grinding abrasive

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

China Carburization Temper Line

Welcome to visit jtfurnace dot com. Carburization Temper Heat Treatment Line is for continuous carburizing quenching and tempering. Advantages: 1.Absorption of foreign advanced technology, optimizing the structure design. large capacity, easy maintenance. 2.Equipped with mixing fans. In the furnace the temperature atmosphere is even. 3.The atmosphere controls stably, the processing product organization is stable 4.Underneath the furnace side is equipped with the clear slag notch. 5.With emission and waste heat recovery agencies before the furnace. 6.Oil tank with the cold heat exchanger and filter, can control the oil temperature and ensure clean. 7.Washing machine is equipped with the oil-water separator and the strong dry winds system. 8.Tempering furnace heating elements have upper and lower sub-row design layout, with the mixing fans. 9.Products with low residual austenite, hardness uniform, bright and clean surface. Product specifications, please email to jtfurnace at hotmail dot com.

Annealing Furnace

China Pit Cementation Furnace

Welcome to visit jtfurnace dot com. Pit Type Cementation Furnace, mainly for low-carbon steel and alloy steel workpiece carburizing, carbonitriding Advantages: 1.Use the specialized water cooling seal electrical machinery, uniform temperature, carbon potential atmosphere and diffusion layer, quick carburizing. 2.Use high-quality, high-temperature ceramic fiber insulation, good thermal insulation performance, fast heat up. 3.The temperature control uses the PID automatic control power, smooth temperature control, uniform temperature, no impact to electric network. 4.Use the water cooling seal ring form to ensure no leakage. 5.The cover is equipped with a drip device, into ammonia tube, sampling tube, exhaust pipe, U-type pressure gauge, easy control and can achieve carbonitriding process. 6.Optional infrared CO2 analyzer, oxygen sensor to achieve automatic control and recording of the furnace carbon potential. Detailed product specifications, please visit our website. And email to jtfurnace at hotmail dot com.

Annealing Furnace

grinding disc for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

nylon abrasive

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

griding wheel

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

Robin engine

MODEL EY28B/D Type Air-cooled.4-cycle.single,horizontal P.T.O.shaft Diameter x Stroke(mm) 75*62 Displacement(cm3) 273 Continuous output(KW/r/min) 3.46/1500(3000),4.05/1800(3600) Max.torque (N.m/r/min) 23.4/1200-1600(11.7/2400-3200) Direction of Rotation Counterrclockwise as viewed from P.T.O shaft Fuel Automobile gasoline Fuel Tank capancity(L) 5.5 Lgnition system Pointless flywheel magneto type starting system Recoil starte Governor Cemtrifugal flweight type Net Weight (kg) 22(21.5) L * W * H(mm) 347*400*400

generator

polishing abrasive disc for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

plastic machine......

plastic machine,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

fiber griding wheel plastic

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

Helical gearmotor

Detailed Product Description:Gear Motor; Gear unit; Helical gear reducer; Helical gear box; Helical geared Motor Our complete range of helical Gear Motors provides the optimum size and power solution for every drive task. It is widely used in food processing machinery, printing and packaging machinery, three-dimensional garage equipment, environmental protection machinery, transportation equipment, metallurgical mine equipment, etc. Characteristic: 1.Highly modular design 2.High strength and small size 3.Small noise and long life 4.Efficiency up to 95% 5.Withstand greater radial load 6.Radial force cannot afford more than 10% of the axial load Technical data: Torque:1.4N.m-23200N.m Input speed:0-1500r/min Output speed:0.06-1090r/min Ratio:1.3-26995 Power:0.12KW-160KW

reducer

Simple smooth belt-022

Style:SFB-022 Size:100cm-110cm Color:Up to customer Minimun order:500pcs We have in good faith, to provide you with a quality product, the best price. We look forward to serving you!Welcome!

hardware

With the rivet smooth belt-011

Style:SFB-011 Size:100cm-110cm Color:up to customer Minimun order:500pcs We have in good faith,to provide you with a quality product,the best price. We look forward to serving you!Welcome!

hardware

nylon abrasive for plastic

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

plastic machines......

plastic machines,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

plastic machineries......

plastic machineries,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

plastic machinery......

plastic machinery,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

extrusion machineries......

extrusion machineries,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

double screw extruder......

double screw extruder, Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

single screw extruder......

single screw extruder.Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching;

plastic machinery

Water-Pump-Bearing in china

Changzhou Tang Dynasty Precision Machinery Industrial Co.,Ltd.is the professional manufacturer and supplier of water pump bearings.Products sell well in domestic market, exported to many countries and regions. To provide high quality products is our guiding objective. Our entire staff will be an excellent product, friendly service, to respond to your trust and patronage.

bearing

Line pipe in china

We are line pipe manufacturer from China,please view them and select the most helpful info for you. Besides, we also provide you with wall mount related products such as seamless steel pipe,steel pipe,oil pipe,casing pipe coupling material,oil casing. We have many kinds of certificates and licenses for ISO9001-2000,API SPEC 5CT & API SPEC 5L, and approval of making tube for boiler and pressure vessel.

steel pipe

Extruder......

Extruder,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching

plastic machinery

Baler Made In China

Y81 Hydraulic metal baler Applications: Y81 series of hydraulic metal balers are applicable in steel plants, recycling companies, ferrous& non-ferrous smelting industry to press metal scraps ( steel, copper, aluminum, stainless steel, discarded automobiles) E m a i l zhouyujian1987@hotmail.com M S N zhouyujian1987@hotmail.com T e l e p h o n e 15961663285 Features: 1)Hydraulic drive for all machine types, manual valve control or PLC control. 2)Bale-discharging: turn-out, push-out, forward-out or manual discharging. equipped for power. 3)No footing bolts needed in installation; diesel engine can be equipped or power 4)Baling force 10 grades from 63 to 400 tons; productivity from 4 to 40 tons per shift

balers

polishing disc for stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

griding wheel plastic

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

nylon polishing for plastic

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

Extrusion machine......

Extrusion machine,sheet extrusion line The macromolecule paint free boards are compound material, which is a new type decorative material, no formaldehyde content, surface smooth and beauty, restraining combustion, elegance color, handle comfort, paint free, burm blocking, innoxious, prevent mildew and damp, no volatile odor, fine surface hardness, anti-impact, sound insulation, shockproof, no shrinking and crazing.

plastic machinery

Extrusion machinery......

Extrusion machinery,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching

plastic machinery

spongy griding wheel plastic

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

extruder machinery......

extruder machinery,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching

plastic machinery

Casting teeth in china

Our company are various types of forging parts,forging parts manufacturer and supplier. Our products are exported all over the world, with its high quality, excellent performance, stable job, low price, fast delivery, well received by the users. Forging parts has big competitive.We have experienced engineers and stable workers.

auger tooth

plastic extruder......

plastic extruder,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching

plastic machinery

plastic extruders......

plastic extruders,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching

plastic machinery

Extruders......

Extruders,Perform the switch between linear speed and non-linear speed Automatic temperature control, pipe extruding, melting glue extruding, winding and forming, synchronous cutting and automatic following control; Pipe extruding machine, temperature control, charging and speed regulation supervise; Vacuum sizing water temperature watching

plastic machinery

nylon polishing plastic

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

polishing stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

Drive Cast in china

Our company are various types of forging parts,forging parts manufacturer and supplier. Our products are exported all over the world, with its high quality, excellent performance, stable job, low price, fast delivery, well received by the users. Forging parts has big competitive.We have experienced engineers and stable workers.

auger tooth

Hydraulic cloths baler

This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal sta Detailed Product Description This machine is used for the packing of light foam types of materials such as plastic film and waste paper under the normal state. The material volumes are reduced dramatically and more materials can be stuffed into the same space, so as to achieve smaller transportation volume, save transportation cost and increase profit for the enterprises. Product Characteristics: 1. This machine applies hydraulic drive. It is convenient in installation, simple in operation and reliable in use. 2. The door is opened hydraulically to remove the package elasticity and discharge the package smoothly, which is safe and reliable. 3. This machine is equipped with a quick-action device. Its packing speed is one time higher than that of other equipment of the same type made by other manufacturers. The product is characterized by high working efficiency and low energy consumption and is suitable for repeated material charging and packing for light foam materials.

scrap baler

spongy polishing plastic

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

Black smooth belt-012

Style:SFB-012 Size:100cm-110cm Color:Up to customer Minimun order:500pcs We have in good faith, to provide you with a quality product, the best price. We look forward to serving you!Welcome!

hardware

Diesel engine

EPA approved Diesel engine 1. EPA approved powerful output. 2. Light and handy in structure. 3. Simple installation & stable operation. 4. Fuel-saving, quick starting 5. Low noise & convenient maintenance. 6. Green power environmentally friendly. 7. Wide application, such as generating sets & water pump sets Model SH186FA/FAE Type Vertical, 1-cylinder, 4-stroke, air-cooled Combustion system Direct injection Bore* stroke [mm(in)] 86*72 (3.39*2.83) Displacement [L(cc)] 0.418 (418) Compression ratio 19:1 Rated power [KW/rpm] 6.3/3600 Rated power [HP/rpm] 8.6/3600 Rated speed (rpm) 3600 Starting system F: Recoil starter; E: Electric starter Fuel tank capacity [L] 5.5 (1.45) Lube capacity [L] 1.65 (0.44) Fuel 0- (summer), -10- (winter) diesel oil Lube CD or better than CD Overall dimension(mm](L*W*H) 420*440*495

generator

Fashion red smooth belt-013

Style :SFB-013 Size:100cm-110cm Color:Up to customer Minimun order:500pcs We have in good faith,to provide you with a quality product, the best price. We look forward to serving you!Welcome!

hardware

polishing copper

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

non woven wheel for polishing stainless steel

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Small grinding wheel with plastic cover(special suitable for polishing small work pieces) Specification: 1.(DiameterxThickness): 100x12mm(4x12/25inch) 100x15mm(4x3/5inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

polishing plastic

Abrasives: silicon carbide Bond: epoxy resin Raw material :non woven Function:(polishing work piece surface ) 1.remove burr 2.wiredrawing Main application: 1.golf product 2.stainless steel product 3.electroplating bronze 4.Aircraft auto and motorcycle parts 5.Metal Product Characteristics: 1.abrasion resistant 2.good polished brightness anti-high temperature 3.flexibility 4.without residue and black discoloration 5.keep sharp 6.low noise 7.little dust 8.easy paint 10.safe Specification: 1.(DiameterxThickness): 6x1 8x1 10x1 12x1 14x1 (inch) 6x2 8x2 10x2 12x2 14x2 (inch) 2.grit:40# 80# 120# 240# 320# 400# 600# 3.hardness:3p-15p 4.color:grey black rose red and white Other demension can be according customer requirement.

abrasive disc

Hydraulic briquetting press (SBJ5000)

We have patent right of briquetting press, patent no:ZL200320325.0 1.Brief introduction : This machine can coldly compress powder and grain shaped cast steel chips, steel chips, sponge iron, copper chips and aluminum chips into column-shaped lump with a density of >5T/M3,PLC control with automatic material feeding, lump discharging and high efficiency. (containing no bonding reagents). The compressed lumps can substitute raw materials and be used directly. This type of machine is suitable for customers that handle moderate iron chip amount The output of each shift is 16 to 20ton. The model is fit for big amount ferrous chip. It gains three patents in the country and our main customers are in Asia area. This kind of machine is produced in China professionally Characteristics: 1. This machine applies a hydraulic drive with low noise. It is safe and reliable. 2. This machine applies a vertical framework structure, occupies small area and is safe and reliable. 3. PLC control with automatic material feeding, lump discharging and high efficiency.   2.Specification:   Model Cyl. Force(KN) Briquet Size (Dia*H) (mm) Briquet Density (T/m3) Blocks (qty/min) Briquet Weight (kgS) Production Rate(T/SHIFT) Motor(KW) SBJ-1500A 150 80*(60-80) > 5 3 2-2.5 3-4 15 SBJ-2000 200 80*(60-80) > 5 3 2.5-3 4-5 18.5 SBJ-2000A 200 80*(60-80) > 5 4 2.5-3 4-5 15 SBJ-2000B 200 80*(60-80) > 5 5 2.5-3 4-6 15 SBJ-2500 250 (80-90)*(60-80) > 5.2 4 2.5-3 4-6 18.5 SBJ-2500B 250 (80-90)*(60-80) > 5.2 5 2.5-3 5-6 18.5 SBJ-2500C 250 (90-110)*(70-100) > 5.2 5 3-4 6-7 18.5 SBJ-3150B 315 (90-110)*(70-100) > 5.5 6 3-4 8-12 30 SBJ-3600 360 (100-140)*(70-100) > 5.5-6 5 3.5-5 10-12 30 SBJ-5000 500 (120-150)*(70-100) > 5.5-6 5 5-6 16-20 37 SBJ-6300 630 (130-160)*(100-120) > 5.5-6 4 6-10 20-30 37

scrap baler

abrasive for polishing plastic

The PVA grinding wheel have the structure of sponge, it is bonded with Polyvinyl Alcohol . Grinding wheel have the characteristic of porosity and elasticity .They are suitable for polishing many kind of work pieces surfaces. The grinding effect of work pieces surface can be rose by this product, it can keep work pieces original form at the same time.

abrasive disc

Shelf high-quality sanitary ware for indoor

Product is smooth, delicate, wearable, corrosion-resistant mirror-like light; Plating, gold-plated, multi-layer nickel + chromium plating, nickel-plated (drawing) plated chrome, galvanized. Another painting process; With salt spray tester, coating thickness tester. . .

hardware fittings